Fire protection pumps
SPP Pumps fire pumps have been specially designed for specific fire protection needs and are approved for this purpose by the most important fire protection institutions in the world. Miltom is the official distributor of SPP in Poland.
Proven and efficient fire pumps
SPP Pumps Limited fire pumps
SPP Pumps Limited fire pumps are manufactured in accordance with the ISO 9001 quality control system. All sets are factory checked, electrically connected and mounted on a common base. Thanks to this, the recipient receives the entire set from one manufacturer, ready for installation, e.g. in the designed container fire pumping station. At the same time, the installation of the set is economical and saves much-needed space.
It is also possible to order additional fittings and accessories needed to equip the fire protection pumping station. We are a distributor of SPP Pumps fire protection pumps designed specifically for fire protection purposes and certified by the most important fire protection institutions. in the world.
By choosing fire pumps from SPP Pumps, you can be sure that you are receiving a product of the highest quality.
Pumps for special tasks
Fire pumps Unistream and Thrustream types have been specially developed and have optimal operating characteristics, reliability and high efficiency required for fire protection sprinkler and hydrant systems.
These pumps are manufactured in accordance with the highest technical standards for fixed fire extinguishing equipment and meet the requirements of British and American standards NFPA 20, FM Approvals. These are sets mounted on a common base, powered by an electric or combustion engine (diesel), ready for immediate connection in the facility due to being equipped with full automatic control. Diesel pumps are additionally supplied with: a fuel tank, an engine cooling system, a battery pack and a muffler with an exhaust pipe.
Fixed firefighting equipment
Advantages of using SPP pumps
Important information
The devices we supply are in accordance with the requirements of NFPA 20 relating to fire protection systems, intended for servicing public and private buildings and are covered by full warranty and post-warranty service. Start-up and setting of pump operating parameters are included in the price of the set and performed by a professional team of service technicians.
Versatility
Wide range of use in fire protection installations and ease of use.
Quality and comfort
Quiet, long-term and failure-free operation of the fire protection device.
Safety is important
Manufactured and checked in accordance with international standards.
Manufacturer's warranty
Długoletnia gwarancja producenta – brytyjskiej firmy SPP Pumps.
Service availability
Easy maintenance of devices and full availability of spare parts.
Low operating costs
High work efficiency guarantees high efficiency and lower costs.
Norms and safety standards
- NFPA 20 standard
- CNBOP-PIB National Certificate of Constancy of Performance No. 063-UWB-0107
- CNBOP-PIB National Certificate of Constancy of Performance No. 063-UWB-0108
- UL certified
CNBOP-PIB
We have a positive opinion from CNBOP
NFPA 20
Standard for the Installation of Stationary Pumps for Fire Protection
Unistream centrifugal pump
The high efficiency end suction pump is one of the simplest types of centrifugal pump. Fire pumps of this type were created specifically to work under heavy loads, where large amounts of water must be pumped efficiently and reliably. This is a precision crafted pump suitable for electric or diesel drives, designed to withstand temperatures up to 580°F.
Configuration
Driven by a horizontal electric motor or combustion engine.
Efficiency
- 32 mm to 150 mm
- Efficiency up to 504 m3 / h
- Lifting height up to 105 m
Functions
-
Horizontal electric motor DIN 24255
-
41 models
-
Midline discharge
-
The removable swivel can be removed without disturbing the pipes
-
Rotors adapted to work
-
High interchangeability – only three
glazing modules cover the entire range -
Suitable for mounting on a base plate
with clutch -
LPCB, FM and/or UL approved
-
In accordance with NFPA 20
Intended use of the product
- Supermarkets
- Hospitals
- Schools and universities
- Hotels
- Office buildings
Fire protection systems:
- Sprinkler systems
- Hydrant systems
- Monitoring systems
- Water curtains
Pump in a Thrustream split housing
Split case pumps are designed for reliable operation on demand. All parts used are standardized and precisely machined to ensure proper alignment, increasing overall durability. Precise balancing of all rotating Thruestream components ensures mechanical reliability. The pumps are available with electric or diesel drive. Their simple, split housing design allows for in-line servicing without disturbing the piping system. Suitable for electric or diesel drives, split pump operating ranges are from approximately 760 liters/min to 19,000 liters/min.
The SPP Thrustream Pump is a UL Listed Horizontal Fire Pump – rated at up to 2,500 USgpm.
Configuration
- Horizontal or vertical open shaft
- A vertically or horizontally mounted electric or combustion engine
Efficiency
- 65 mm to 350 mm
- Efficiency up to 3500 m3 / h
- Lifting height up to 300 m
Functions
- Axially mounted housing – rotating element can be removed without disturbing the piping system
- High hydraulic efficiency
- Dual entry rotors reduce final thrust, increasing efficiency and bearing life
- Shaft sleeves fitted as standard for flexibly sealed pumps and as an alternative to mechanical seals. Stainless steel shafts fitted as standard for mechanical seals
- 40 models.
- Modular design for maximum interchangeability
- Grease lubrication
- Soft or mechanical seals
- Suitable for mounting on the motherboard by coupling
- LPCB, FM and UL approved
- NFPA 20 compliant
Intended use of the product
- Airports
- Production plants
- Warehouses
- Power plants and refineries
- Data centers
- Fuel warehouses
- Water treatment and supply
Fire protection systems:
- Sprinkler systems
- Hydrant systems
- Flood systems
- Monitoring systems
- Water curtains
SPP Pumps Instream
A line of vertical SPP fire pumps for lighting and a compact series for smaller pumping stations.
SPP vertical in-line pumps are available to operate from approximately 760 liters to 5,700 liters per second (USGPM) and are available for electric drives. Vertical motor pump, access to pump electronics for maintenance and repair.
These high-efficiency pumps can also be supplied as pre-wired packages.
Configuration
- Powered by an electric motor
- Vertically coupled
Efficiency
- 40 mm to 100 mm
- Efficiency up to 216 m3 / h
- Lifting height up to 65 m
Functions
- Closed in-line design
- Simple installation and operation
- Economical solution
- TEFC IE2 motors installed as standard
- High preview – direct features from Eurostream
- Mechanical seal as standard
- Rotors ready for work
Intended use of the product
- Office buildings
- Hospitals
- Airports
- Production plants
Fire protection systems:
- Sprinkler systems
- Hydrant systems
- Flood systems
- Monitoring systems
- Water curtains
Pump in a split Hydrostream casing
The Hydrostream pump is a split housing unit designed for reliable operation on demand. All parts are standardized and precisely machined to ensure proper alignment and increase durability. Precise balancing of all rotating components ensures mechanical reliability. The pumps are available with electric and diesel drive. The simple, split housing design allows for in-line servicing without disturbing the piping system. Suitable for electric or diesel drives, the pump operating ranges are from approximately 760 liters/min to 19,000 liters/min.
The SPP Hydrostream pump is a UL certified horizontal fire pump with a capacity of up to 4,000 USgpm.
Configuration
- Horizontal, vertical open shaft
- Vertically driving an electric motor or a horizontal combustion engine
Efficiency
- 25 mm to 600 mm
- Efficiency up to 9000 m3 / h
- Lifting height up to 275 m
Functions
- Axially mounted housing – rotating element can be removed without disturbing the piping
- High hydraulic efficiency
- Dual and single return inputs at the rear
reducing the final thrust of the rotor, increasing the efficiency and service life of the bearing. Shaft sleeves are standard - 62 models. The modular design guarantees maximum interchangeability. Rotor selection options
- Wide selection of materials
- Lubrication with grease or oil
- Soft packaging or mechanical seals
- API options available in the application
- FM and UL approved
- Complies with NFPA 20
Intended use of the product
- Airports
- Production plants
- Warehouses
- Power plants and refineries
- Data centers
- Fuel warehouses
- Water treatment and supply
Fire protection systems:
- Sprinkler systems
- Hydrant systems
- Flood systems
- Monitoring systems
- Water curtains
Warranty protection and additional post-warranty packages from Miltom
Pump sets purchased at Miltom are covered by the manufacturer’s warranty and the care of the Miltom service operating throughout the country. In order to maintain the warranty, it is important to perform the inspections recommended by the manufacturer. It is possible to extend the standard warranty for a period of up to 5 years, ask your representative for details.
Send a message
Write to our expert →
For each fire protection installation, a pump set with appropriate capacity should be selected. That’s why we offer a free consultation at the stage of preparation for the project.
We will help you choose the appropriate capacity and type of fire pump set, tailored to your investment.
Fire pumps
Michał Stępniak
+48 693 805 807
michal.stepniak@miltom.com.pl